Graphtec Plotter Driver OPS628 Ver. 10.30
for Microsoft Windows 7 / Windows 8.1 / Windows 10

Thank you for choosing the Graphtec OPS628 Plotter Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  GDSETUP.EXE
  GDSETUP.INI

  WIN_X86\DISK1                 For Windows 7 / Windows 8.1 / Windows 10
  WIN_X86\GPGL.DLL
  WIN_X86\GPGLUI.DLL
  WIN_X86\GPGLUI.CHM
  WIN_X86\OEMSETUP.INF
  WIN_X86\OEMSETUP.CAT
  WIN_X86\README.TXT
  WIN_X86\GX3000.GPD
  WIN_X86\MP5000.GPD
  WIN_X86\MP303.GPD
  WIN_X86\FP8000.GPD
  WIN_X86\FP9000.GPD
  WIN_X86\PT5M.GPD
  WIN_X86\CE1000.GPD
  WIN_X86\CE2000.GPD
  WIN_X86\CE2120AP.GPD
  WIN_X86\CE3000.GPD
  WIN_X86\CE3120AP.GPD
  WIN_X86\CE5120AP.GPD
  WIN_X86\FC2230.GPD
  WIN_X86\FC3200.GPD
  WIN_X86\FC3600.GPD
  WIN_X86\FC4100.GPD
  WIN_X86\FC4200.GPD
  WIN_X86\FC5100.GPD
  WIN_X86\FC612.GPD
  WIN_X86\TM1040.GPD
  WIN_X86\TM1030.GPD
  WIN_X86\TM1031.GPD
  WIN_X86\TM1220.GPD
  WIN_X86\TM1220B.GPD
  WIN_X86\TM1220S.GPD
  WIN_X86\TM1220R.GPD
  WIN_X86\JC9000.GPD
  WIN_X86\JX1000.GPD
  WIN_X86\JX2000.GPD
  WIN_X86\CE6120AP.GPD
  WIN_X86\CE7130AP.GPD
  WIN_X86\GTCGLMON.DLL

  WIN_X86\JC80AXPM.TBC        For Color Adjustment
  WIN_X86\JC80AXST.TBC
  WIN_X86\JC80AXTC.TBC
  WIN_X86\JC80AXTM.TBC
  WIN_X86\JC80JRPF.TBC
  WIN_X86\JC80PRG.TBC
  WIN_X86\JC80RVLM.TBC
  WIN_X86\PRG.JX2


Required PC specifications
(The specication needs to be higher than recommended specification
 by using OS)
* OS           : Windows 7
                  (Ultimate / Enterprise / Professional / Home Premium)
                 Windows 8.1
                  (Windows 8.1 / Pro / Enterprise)
                 Windows 10
                  (Home / Pro / Enterprise / Education)
* CPU          : 1GHz 32-bit (x86) processor or faster
* Memory       : 1GB or larger
* Display      : 1024x768 True Color
* Mouse
* CD-ROM drive
* USB interface      : USB2.0(Full Speed)
* Serial interface   : RS-232C
* Parallel interface : Centronics parallel interface
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.


Precautions to be observed when connecting the FC5100 or CE3000, FC3600, 
CE3000-120AP, MP303-04, CE5000-120AP, CE6000-120AP, CE7000-130AP via USB
   * Operation with other than the included driver is not guaranteed.
   * Do not connect multiple plotters to a single computer.
   * Operation is not guaranteed if the plotter is connected to a USB hub 
     or to a USB extension board.

END
